home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: rover.mcp.com!bin
- From: Justin Bell <justin@misl.mcp.com>
- Subject: A500 and SupraDrive Help wanted
- X-Nntp-Posting-Host: rover.mcp.com
- To: feednews%rover.mcp.com@iquest.net
- Message-ID: <199602070114.UAA12583@misl.mcp.com>
- Originator: bin@rover.mcp.com
- Sender: news@iquest.net (News Admin)
- Organization: Macmillan Computer Publishing
- Date: Wed, 7 Feb 1996 01:14:47 GMT
-
-
- OK,
- I have an A500 rev 6A and was wondering what I have to do to put the extra 512k
- CHIP Ram on the motherboard, there are sockets for it, and what jumpers must be
- cur, etc. I already have a 1.8 MB Ram expansion, called a Pro Ram, and it
- says that it doesnt support 1MB Chip Ram, does that mean by using it, or
- if I put the extra RAM on the motherboard would that be usable with the
- Pro RAM board, it's in the trap door, btw
-
- Also, how does one add RAM to a SupraDrive, I assume it goes in the SCSI
- Interface, but where?
- the only possibility I can see if the 50 pin connector, but I doubt that
- that's where it goes. Maybe it is.
-
- all help is appreciated
- thanks
-
- Justin
- --
- /-justin@misl.mcp.com--justin@mud.mcp.com--jbell@mail.mcp.com--\
- |Justin Bell | Time and rules are changing. |
- |Macmillan Online | Attention span is quickening. |
- | WebMeister | Welcome to the Information Age. |
- \-------------http://www.mcp.com/people/justin/----------------/
-
-
- Copyright (c) Justin A. G. Bell, 1995. All rights reserved.
- The Microsoft Network is prohibited from redistributing this work in any
- form,in whole or in part. License to distribute this post is available
- to Microsoft for $10000. Appearance without permission constitutes an
- agreement to these terms. Please send notices of violation to
- Postmaster@microsoft.com and justin@mcp.com.
-